Contax I4R - Resetting All the DPOF Print Settings

Introduction Getting Ready Taking Pictures Playback Set Up
EN-123
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
4 Press the 4-way button up or down to
select [INDEX], then press right.
5 Press the 4-way button up to select [SET
UP INDEX PRINT] and press the OK
button E.
Index printing is then set and the print settings screen reappears.
6 Press the MENU button K.
Resetting all the DPOF print settings
1 Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
2 Press the MENU button K to display the menu icons.
3 Press the 4-way button left or right to
select DPOF [T] and press the OK button
E.
The print settings screen appears.
BNote
• Selecting [ERASE INDEX SETTING] and pressing the OK button E deletes the index
print settings and returns you to the print settings screen.
• Select [RETURN] to return to the print settings screen.
INDEX
ALL RESET
EXECUTE
SET
PRINT SEL IMAGE
PRINT SETTINGS
RETURN
DPOF 2 PRTS
ON
INDEX SET
INDEX PRINT SETTINGS
SET UP INDEX PRINT
ERASE INDEX SETTING
RETURN
DPOF