Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-110
BACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
Erasing a recorded message
Use the procedure below to erase a postrecorded voice message.
1 Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
2 Press the MENU button K to display the menu icons.
3 Press the 4-way button left or right to
select POSTRECORDING [p] and press the
OK button E.
4 Press the 4-way button left or right to select the image with
the voice message you want to erase.
5 Press the 4-way button up to select
[EXECUTE], then press the OK button E.
The voice message is erased and the "RECORD SOUND?" message
appears.
6 Press the MENU button K.
A Important
Audio cannot be erased from protected images.
POSTRECORDING
EXECUTE
CANCEL
ERASE SOUND?
To Next Page
Loading...
