Contax I4R - SHUTTER VOL] Adjusting the Volume of the Shutter Sound

Introduction Getting Ready Taking Pictures Playback Set Up
EN-169
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
[SHUTTER VOL] Adjusting the Volume of the Shutter Sound
Use this procedure to adjust the volume of the shutter sound.
1 Turn the camera on and press the mode
button until "G" lights up on the mode
select LED.
2 Press the 4-way button up or down to
select [SHUTTER VOL], then press right.
3 Press the 4-way button up or down to
select the desired volume, then press the
OK button E.
The selected volume is applied.
[+3] : Maximum volume
[+2] : Medium volume (Default)
[+1] : Low volume
[OFF] : No shutter sound
BNote
This setting is retained when you turn the camera off.
BEEP
SHUTTER VOL
START SCREEN
REC REVIEW
SET
2SEC
ENGLISH
VIDEO OUT
+
2
+
2
SET UP(2/3)
NTSC
LANGUAGE
BEEP
SHUTTER VOLSHUTTER VOL
START SCREENSTART SCREEN
REC REVIEWREC REVIEW
+
3
+
2
+
1
+
1
OFFOFF
ENGLISHENGLISH
VIDEO OUT NTSC
SET UP(2/3)
LANGUAGE