Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-105
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
6 Press the MENU button K.
Unprotecting an image
1 Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
2 Press the MENU button K to display the menu icons.
3 Press the 4-way button left or right to
select PROTECT [U] and press the OK
button E.
4 Press the 4-way button left or right to select the image to be
unprotected.
The [U] icon is displayed with protected images.
5 Press the 4-way button up to select
[EXECUTE], then press the OK button E.
The image protection is removed.
6 Press the MENU button K.
A Important
[ERASE ALL] (Æ p.103) does not erase protected images. However, [FORMAT]
(Æ p.161
) erases all of the images on the card, including protected images.
BNote
In SINGLE playback mode, press the SCENE button I to view the protection settings
screen. Press the 4-way button up to select [SET] and press the OK button E to protect
the currently displayed image.
BNote
• To unprotect another image, repeat steps 4 and
5.
• In GROUP playback, all of the images in a
group of continuous shots are unprotected when
you unprotect an image from a group.
PROTECT
EXECUTE
RETURN
UNPROTECT?
To Next Page
Loading...
