Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-149
NEXT
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
Connecting to a Television
«Use the VIDEO OUT port to connect to the
television»
You can view the images taken with the camera on a television. You can
view images you have taken on a television while you are traveling or at
your home.
1 Insert the memory card into the camera.
(Æ p.28
)
2 Place the camera in the USB cradle and
connect the AC adapter.
3 Use the supplied video cable to connect
the USB cradle holding the camera to the
television, then turn the television on.
4 Turn the camera on (Æ p.31) and press
the mode button until "P" lights up on the
mode select LED.
Images are displayed on the television.
The shooting, playback and SET UP functions are enabled in this state.
A Important
You cannot view images on the television unless
there is a memory card in the camera.
A Important
Turn the camera and television off before
connecting them.
BNote
Refer to "Using the USB Cradle" (Æ p.36) for
details on attaching the USB cradle.
To Next Page
Loading...
Need help?
General
