Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-150
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
A Important
• Set the television to video input mode.
• The LCD monitor turns off while the video cable is connected.
• Images may sometimes not be displayed correctly on a television.
BNote
The video output format of the camera can be selected from NTSC and PAL formats.
Because different TV signal formats are used in different countries, when you connect the
camera to a television while on vacation, you should set the video output to the format of
the country you are in. Refer to p.178
to configure this setting.
To Next Page
Loading...
Need help?
General
