Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-180
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
[DISPLAY INFO] Choosing the Information
Displayed on the Screen
In "C" and "M" modes, a large number of icons are displayed on the LCD
monitor. If you find the icons annoying when you are shooting, it is
possible to change the display to make the screen easier to view.
1 Turn the camera on and press the mode
button until "G" lights up on the mode
select LED.
2 Press the 4-way button up or down to
select [DISPLAY INFO], then press right.
3 Press the 4-way button up or down to
select the display style, then press the
OK button E.
The selected setting is applied.
[ON] : Icons for all of the current settings are displayed on the screen.
(Default)
[OFF] : Only the Flash mode, Macro/Landscape mode, Scene mode,
Digital Zoom Magnification and Date are displayed.
BNote
This setting is retained when you turn the camera off.
STARTUP MODE
DISPLAY INFO
FILE NO.
MODE RESET
STILL
ON
EXECUTE
EXECUTE
SET UP(3/3)
STARTUP MODESTARTUP MODE
DISPLAY INFODISPLAY INFO
FILE NO.FILE NO.
MODE RESETMODE RESET
STILL
ONON
OFFOFF
EXECUTEEXECUTE
SET UP(3/3)
To Next Page
Loading...
Need help?
General
