Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-151
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
«Playback on a television that supports D3
or higher video input»
You can view the pictures taken with the camera on a television that
supports D3 or higher video input. You can get more detailed images by
connecting the television to the D3 video output connector instead of the
VIDEO OUT port.
About the D connector
The D connector is a standardized video connector component that supports digital tuners, DVD players, etc.
This camera offers 1080 scan line resolution. You can view images on a television by connecting the camera to
a D3 or D4 video input port (D3 video is displayed even if the camera is connected to a D4 video input port).
You cannot view images on a television using a D1 or D2 video input connector.
1 Insert the memory card into the camera.
(Æ p.28
)
2 Place the camera in the USB cradle and
connect the AC adapter.
A Important
• Connection to a television supporting D3 or higher video input is only available within
Japan. This cannot be used in foreign countries.
• You cannot use shooting or SET UP functions while connected to a television via a D3
or higher video input connector.
• You cannot playback movies or postrecorded audio while playing back on a television
using a D3 or higher video input connector. Only the first frame of movies will be shown.
A Important
You cannot view images on the television unless
there is a memory card in the camera.
A Important
Turn the camera and television off before
connecting them.
BNote
Refer to "Using the USB Cradle" (Æ p.36) for
details on attaching the USB cradle.
To Next Page
Loading...
Need help?
General
