Contax I4R User Manual

Introduction Getting Ready Taking Pictures Playback Set Up
EN-176
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
[REC REVIEW] Checking Images Right After You Shoot Them
«Applicable mode: C»
Use this procedure to have the camera display images for several seconds
immediately after you shoot them.
1 Turn the camera on and press the mode
button until "G" lights up on the mode
select LED.
2 Press the 4-way button up or down to
select [REC REVIEW], then press right.
3 Press the 4-way button up or down to
select the desired number of seconds and
press the OK button E.
This sets the number of seconds to show images.
[2SEC] : The photographed image is displayed for 2 seconds right after
shooting. (Default)
[4SEC] : The photographed image is displayed for 4 seconds right after
shooting.
[OFF] : The photographed image is not displayed right after shooting.
A Important
This setting is retained when you turn the camera off.
BEEP
SHUTTER VOL
START SCREEN
REC REVIEW
+2
+2
SET
2SEC
ENGLISH
VIDEO OUT NTSC
SET UP(2/3)
LANGUAGE
BEEP
SHUTTER VOLSHUTTER VOL
START SCREENSTART SCREEN
REC REVIEWREC REVIEW
+2
+2
2SEC2SEC
4SEC4SEC
OFFOFF
VIDEO OUT NTSC
SET UP(2/3)
LANGUAGE

Contax I4R Specifications

General

Brand	Contax
Model	I4R
Category	Digital Camera
Language	English