Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-83
NEXT
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
Viewing Still Images
«Applicable images: Still images only»
1 Turn the camera on and press the mode
button until "P" lights up on the mode
select LED.
The last image shot appears on the LCD monitor.
2 Press the 4-way button left or right to
select the image to view.
The table below shows the operations that can be performed during playback.
Operation Description
Up Switches to the File No display and the information display. (Æ p.85
)
Down Erases the image. (Æ p.100
)
Left Displays images in reverse order. Hold the 4-way button left for more than
one second to scroll through the images at high speed.
Right Displays images in forward order. Hold the 4-way button right for more
than one second to scroll through the images at high speed.
OK button E Enlarges the image for playback. (Æ p.84
)
SCENE button I Protects the image. (Æ p.104
)
Continuous shooting
button N
Plays back the group of continuous shots if the image belongs to a group
of continuous shots. (Æ p.91
)
BNote
• Any resized images are displayed before the normal images.
• Resized images are displayed at different sizes depending on the image size. When this
occurs, the resize icon [V] appears in the top-left corner of the LCD monitor. For more
information on resizing images, see "
[V] Resizing and Trimming Images (RESIZE)"
(Æ p.111
).
To Next Page
Loading...
Need help?
General
