Contax I4R User Manual

Introduction Getting Ready Taking Pictures Playback Set Up
EN-36
NEXT
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
Using the Accessories
Using the USB Cradle
Use the USB cradle to charge the battery pack and to connect to a
computer, printer, television or television that supports D3 or higher video
input (Japan only).
z Placing the camera in the USB cradle.
Place the camera in the cradle in the direction shown in the illustration.
z Removing the camera from the USB cradle.
Take the camera and remove it from the USB cradle as shown in the
illustration.
A Important
Make sure the camera is turned off when attaching it to or removing it from the USB
cradle.
A Important
Do not insert the camera the wrong way around.
Inserting the camera in the wrong direction may
damage the camera or cradle.
A Important
Do not remove the camera from the USB cradle while the camera is communicating with a
PC or other device. Doing so may corrupt the files on the memory card, or even damage
the camera.

Contax I4R Specifications

General

Brand	Contax
Model	I4R
Category	Digital Camera
Language	English