Contax I4R User Manual

Introduction Getting Ready Taking Pictures Playback Set Up
EN-131
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
3 Press the SCENE button I.
A message appears asking you to confirm that you want to print the
images.
To change print settings, see "
Specifying the print settings" (Æ p.127).
4 Press the 4-way button up to select
[EXECUTE], then press the OK button E.
Printing begins, and when printing is successfully completed, the print
completion screen appears.
Printing using DPOF settings
1 In the print menu screen, press the 4-way
button up or down to select [DPOF
PRINTING] and then press the OK button
E.
The DPOF print screen appears.
BNote
Press the MENU button K to display the print
menu screen.
A Important
If an error occurs during printing, an error
message is displayed and printing stops. See
p.189
for information on the message displayed
and the correct response.
BNote
• You can specify the print settings by clicking the
SCENE button I before proceeding with this
step. (See steps 2 to 12 on p.127
for information
on the setting procedure.)
• During printing, a counter on the LCD monitor
displays the total number of prints and the
number of prints completed so far.
• Press the MENU button K to stop printing in
progress.
A Important
DPOF printing can only be used if DPOF settings have already been specified for the
images. (Æ p.120
)
EXECUTE
CANCEL
EXECUTE PRINT?
PAPER TYPE
BORDERLESS
DATE
2L
PRINT QTY.
PAPER SIZE
1
PHOTO
YES
NOT PRINT
PRINT MENU
SINGLE PRINT
PRINT MULTIPLE IMAGES
DPOF PRINTING
PRINT SETTINGS

Contax I4R Specifications

General

Brand	Contax
Model	I4R
Category	Digital Camera
Language	English