Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-77
NEXT
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
Adjusting Image Colors and Other Settings
[s] Selecting the Light Source (White Balance)
«Applicable mode: C/M»
The color of a subject varies depending on the light source used.
Setting the white balance
is the process by which image colors are
calibrated to ensure that photographed objects appear in their true colors
regardless of the light source used.
1 Turn the camera on and press the mode button until "C" or
"M" lights up on the mode select LED.
2 Press the MENU button K to display the menu icons.
3 Press the 4-way button left or right to
select WHITE BALANCE [s] and press
the OK button E.
4 Press the 4-way button up or down to
select the desired setting and press the
OK button E.
The white balance setting is updated.
[X] Automatic
Automatically sets the white
balance to suit the ambient
conditions. (Default)
[w] Daylight
Specifies the light source.
[x] Incandescent
[t] Cloudy
[v] Fluorescent
[u] Preset
Uses the white balance specified
in [WB PRESET]. This value
must be set beforehand.
[SET] WB Preset
Allows you to configure the white
balance by yourself.
WHITE
BALANCE
SET
To Next Page
Loading...
Need help?
General
