Contax I4R - SHARPNESS] Enhancing the Image Outlines

Introduction Getting Ready Taking Pictures Playback Set Up
EN-81
BACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
[SHARPNESS] Enhancing the Image Outlines
«Applicable mode: C»
This setting enables you to take pictures in which the subject's outline is
sharpened or softened.
1 Turn the camera on and press the mode
button until "C" lights up on the mode
select LED.
2 Press the MENU button K to display the menu icons.
3 Press the 4-way button left or right to
select SHARPNESS [n] and press the OK
button E.
4 Press the 4-way button up or down to
select the desired setting and press the
OK button E.
The sharpness setting is updated.
[n+3] : +3
[n+2] : +2
[n+1] : +1
(No icon) : STANDARD (Default)
[n-1] : -1
5 Press the MENU button K.
The icon for the selected sharpness appears on the LCD monitor.
A Important
This setting is retained when you turn the camera off.
SHARPNESS
–1
STANDARD
+1
+2
+3
Softer outlines
Sharper outlines
+1