Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-65
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
5 Press the MENU button K.
The specified value appears on the LCD monitor.
A Important
• The exposure compensation setting does not change after a shot is taken.
• This setting reverts to the default value when you turn the camera off.
• When the flash is used, exposure compensation is limited to between -1.0 and +1.0 EV.
BNote
You cannot set the exposure compensation in Night View mode.
+2.0
To Next Page
Loading...
