22
(3) HYDRAULIC LIFT CASE REMOVAL
1. Remove the seat and seat bracket.
2. Remove the lever grip from position control
lever and remove the lever guide by removing
the fixing bolts.
3. Remove the top link bracket .
4. Remove the fixing bolts of hydraulic lift case
and lift up the hydraulic lift case to remove.
(8) REAR AXLE CASE REMOVAL
1. Remove the ROPS.
1) Remove hinge pin and position pin. Remove
ROPS upper flame.
2) Remove fixing bolts of ROPS lower flame
and remove ROPS lower flame.
Top link bracket
To Next Page
Loading...
