24
5. In case of equipping the draft control and
disassembling the top link bracket, adjust the
dimension of stopper bolt to 29 mm(1.14in)
and lock it by jam nut.
(3) Center case reinstallation
1. Apply the liquid packing (Threebond #1208D)
to the mating surface of the center case and
transmission case.
2. Tightening torque of center case fixing bolts.
86.8~97.6 lbf.ft (12 ~13.5 kgf-m)
(4) Clutch housing reinstallation
1. Apply the liquid packing (Threebond #1208D)
to the mating surface of the clutch housing
and center case.
2. Tightening torque of the clutch housing fixing
bolts.
86.8~97.6 lbf.ft (12 ~13.5 kgf-m)
To Next Page
Loading...
