Cub Cadet 7360SS

70
4.Thermoswitch and thermounit
combination installation
Coat the threads of the combination with Three
Bond 1104. Put the combination in position and
tighten it to the specified torque.
(10)COOLING SYSTEM
REINSTALLATION
1.Water pump installation
Put a new gasket in position on the water
pump flange. Install the water pump in
position on the cylinder block.
2.Thermostat installation
(1)Put the thermostat in the thermostat case.
(2)Put a new gasket in position on the
thermostat case. Install the thermostat
assembly in position on the cylinder head.
3.Cooling fan installation
(1)Install the spacers in position in the fan as
shown.
(2)Install the pulley in position on the water
pump. Install the fan and spacer combi-
nation in position on the pulley.