VEHICLE IDENTIFICATION NUMBERS
1
WARNING
!
• Altering this equipment in any manner which adversely affects the equipments operation,
performance, durability or use, may cause hazardous conditions.
SPECIFICATION INFORMATION
All information contained in this manual is the latest
available at the time of printing. Cushman Textron re-
serves the right to make changes at any time without
notice.
• After you identify a part by the reference number and
the six digit cushman part number, always read the
description of the part to be sure it is what you
want.
NOTICE
IMPORTANT!
THIS EQUIPMENT SHOULD NOT BE MODIFIED OR ADDED
TO WITHOUT THE MANUFACTURER’S AUTHORIZATION.
This product meets requirements of ANSI B56.8 and has been approved by Factory Mutual Research Corporation
to meet all Powered Industrial T ruck portions (classification D or G) of the OSHA requirements (as stated in section
1910.178). Approved powered trucks shall bear a label or some other identifying mark indicating approval by the
testing laboratory. This product conforms to EC directives and amendments: 89/392 & 91/368.
STANDARDS AND PUBLICATIONS
Users, operators and service persons should be familiar with the following standards and publications:
(The material may be obtained from the addresses shown).
• Flammable and Combustible Liquids Code:
ANSI/NFPA 30.
ADDRESS:
American National Standards Institute, Inc.
1430 Broadway
New York, New York 10018 U.S.A.
OR
National Fire Prevention Association
Batterymarch Park
Quincy, Massachusetts 02269 U.S.A.
• Factory Mutual Approval Standard:
Class No’s. 7811 & 7813; Gasoline or Diesel
Powered Trucks, Types G, GS, D or DS.
ADDRESS:
Factory Mutual Research Corp.
1151 Boston--Providence Highway
Norwood, Massachusetts 02062 U.S.A.
• National Fire Protection Association:
ANSI/NFPA #505; Powered Industrial Trucks.
ADDRESS:
National Fire Prevention Association
Batterymarch Park
Quincy, Massachusetts 02269 U.S.A.
• ANSI/ASME B56.8 Personnel Burden Carriers
ADDRESS:
American National Standards Institute, Inc.
1430 Broadway
New York, New York 10018 U.S.A.
• ANSI/UL 558; Internal Combustion Engine Powered
Industrial Trucks
ADDRESS:
American National Standards Institute, Inc.
1430 Broadway
New York, New York 10018 U.S.A.
OR
Underwriters Laboratories Inc.
333 Pfingsten Road
Northbrook, Illinois 60062 U.S.A.
To Next Page
Loading...
