SERVICE & MAINTENANCE Cont.
33
NOTICE
Reference to item 1:
Too much grease can damage the seals.
Ref. Number Of
No. Lubrication Area Grease Fittings
LUBRICATION CHART
Ref. Number Of
No. Lubrication Area Grease Fittings
Lubricate all chassis fittings with lithium base pressure gun grease every 100 hours or 1000 miles.
1 Drive shaft 2.........................
2 Upper Ball Joints 2....................
3 Lower Ball Joint 2.....................
4 Tie Rod Ends 4.......................
Transmission Fluid SAE EP 80--90 Gear Lube.
Automatic Transmission Fluid. Mercon/Dexron II
Differential Fluid
SAE EP 80--90 Gear Lube...
Power Steering Power Steering Fluid (GM)....
Brake Fluid Dot 3...........................
LUBRICATION RECOMMENDATIONS
Pressure Gun Grease Lithium Base...........
Hydraulic Fluid Ransomes Turf Protector Biodegradable (Hyd Benz Bio 377)......
2
2
4
Brake Fluid
Reservoir
Fuse Box
3
3
1
Figure 42
Lubrication Points
To Next Page
Loading...
