MAN MACHINE INTERFACE
290 PRS-7367
MCPU Cyclic redundancy check error
***-****-*********-******-**.**
7.3.1.2 Communication
This section, describes the information communication of network setting of the protection relay
including IP, MAC and NetMask of network 1, 2 and 3 respectively. User can access this function
through the following path: “Physical information > communication”. The network setting data of
communication information is listed in below figure 7.3.3 and table 7.3.2:
/ Physical Information / Communication
Network setting
NET 1 IP : 222.111.112.003
0001/0001
NET 1 MAC: 00.00.DE.6F.70.03
NET 1 NetMask : 255.255.255.000
NET 2 IP : 196.005.001.003
NET 2 MAC: 00.01.C4.05.01.03
NET 2 NetMask : 255.255.255.000
NET 2 IP : 196.005.002.003
NET 3 MAC: 00.02.C4.05.02.03
NET 3 NetMask : 255.255.255.000
Figure 7.3-3 Overview Display Diagram of Network Setting
Table 7.3-2 Communication data detail
IP address of internet protocol for Ethernet port 1
MAC address of internet protocol for Ethernet port 1
NetMask address of internet protocol for Ethernet port 1
IP address of internet protocol for Ethernet port 2
MAC address of internet protocol for Ethernet port 2
NetMask address of internet protocol for Ethernet port 2
IP address of internet protocol for Ethernet port 3
MAC address of internet protocol for Ethernet port 3
NetMask address of internet protocol for Ethernet port 3