CYG PRS-7367 - Manual Version History

Manual Version History
PRS-7367 349
14 Manual Version History
In the current version of the instruction manual, several descriptions on existing features have
been modified.
Manual Version
Software
Version
Date
Description of change
Source
New
Beta
1.00
1.00
2014-04-15
Form the original manual.
1.00
1.01
1.01
2015-05-21
Update the number of the binary inputs and binary
outputs.
Add the binary input hardware demo diagrams in the
binary input tables.
Update the description of IEC61850 dual-MMS
Ethernet.
1.01
1.02
1.02
2016-01-24
Add parameters of fault location function.
Update the configurable signals.
1.02
1.03
1.03
2016-08-16
Update the communication description.
Update the mechanical specifications.
Update the main CPU module picture.
Update the setting list.
1.03
2.01
1.10
2017-12-16
Update all the protection functions.
2.01
2.02
1.19
2018-2-28
Add programmable IDMT function
2.02
2.03
1.20
2018-12-31
Add programmable capacitor functions, voltage
selection and inverse power function
2.03
2.04
1.20
2019-3-28
Add the setting group modify method，update the
Breaking capacity of Tripping output, Update the AR
function
2.04
2.05
1.20
2019-4-17
Update the difference frequency value is 20 Hz in
frequency protection
2.05
2.06
1.20
2019-4-23
Update terminal definition, Update the Logic
diagram of 51P/51G/67P/67G/51NTand modify
some spelling mistake.
2.06
2.07
1.20
2019-4-27
Update the 32R formula coefficient K, the logic of
27/49 and 49 formula format mistake. Update the
Dimensions of this relay and the cut-out in the
cubicle.
2.07
2.08
1.20
2019-6-11
Add Mechanical Protection (MP) function; update
the operate enable settings of 59/59G/27. Update
the optical information in Ethernet Port.
2.08
2.09
1.20
2019-6-12
Update the logic of 81URS and 27; update the alarm
enable setting of 59/59G/27.
2.09
2.10
1.20
2019-6-27
Update AR return time delay when CB healthy=0
and CB_Close=0. Add The frame of the CPU