Select window split mode. Click to display in full screen. Click ESC button to exit. See Figure 5-147.
Figure 5-147
Customized playback
Click , you can see the following interface. See Figure 5-148.
Figure 5-148
Now you can select one or more channel(s) and then click to search record(s).
System supports one or more channels. The window split mode can auto adjust according to the channel
amount. System max supports 16-split.
Click button to select all channels at the same time.
Click , system begins playback.
Select Channel
1～n(n depends on your product channel amount) means main stream and A1～An ((n depends on
your product channel amount)) means sub stream.
HD Transcoding
Note
This function is for some series product only.
When the bandwidth is limited, you can use this function to transfer the HD bit stream to the specified
lower resolution and then playback. It is to reduce network load.
In Figure 5-146, select the playback period and then select playback mode and channel(s). Check the
box to enable HD transcoding function and then click the Set button; you can see the following interface.
To Next Page
Loading...
