Dahua HCVR82**A-S3 Series User Manual

45
 None: There is a filter. DVR displays all devices by default.
 IPC: You can only view all network cameras.
 DVR: You can view all storage devices such as DVR, NVR.
 Edit: Click button or double click a device in the list, you can change channel setup.
 Delete: Please select one device in the Added device list and then click to remove.
 Status: means connection is OK and means connection failed.
 Delete；Select a device on the Added device list, click Delete button, system disconnect device first
and then remove its name from the list.
 Manual add: Click it to add the IPC manually. The port number is 37777. The default user name is
admin and password is admin.
Figure 4-14
Click the Manual Add button; you can go to the following interface. See Figure 4-15.
Channel number：The dropdown list here displays unconnected channel number. You can go to Figure
4-14 to set remote channel connection.
Please note:
 This series product supports the IPC from many popular manufactures such as Sony, Hitachi, Axis,
Samsung, Dynacolor, Arecont, Onvif and Dahua.
 System default IP address is 192.168.0.0 if you do not input IP address. System will not add current
IP address.
 You can not add two or more devices in the Manual Add interface (Figure 4-15.). Click OK button,
system connects to the corresponding front-end device of current channel on the interface.

Dahua HCVR82**A-S3 Series Specifications

General

Brand	Dahua
Model	HCVR82**A-S3 Series
Category	DVR
Language	English