Selection number Selection name Selection description
0 Disabled Function is disabled.
1 No action No action is taken.
2 Select set-up 1 Changes active setup to setup 1.
3 Select set-up 2 Changes active setup to setup 2.
10 Select preset ref 0 Selects preset reference 0.
11 Select preset ref 1 Selects preset reference 1.
12 Select preset ref 2 Selects preset reference 2.
13 Select preset ref 3 Selects preset reference 3.
14 Select preset ref 4 Selects preset reference 4.
15 Select preset ref 5 Selects preset reference 5.
16 Select preset ref 6 Selects preset reference 6.
17 Select preset ref 7 Selects preset reference 7.
18 Select ramp 1 Selects ramp 1.
19 Select ramp 2 Selects ramp 2.
22 Run Issues start command to drive.
23 Run reverse Issues start reverse command to drive.
24 Stop Issues stop command to drive.
25 Qstop Issues quick stop command to drive.
26 DC Brake Issues DC brake command to drive.
27 Coast The drive coasts immediately. All stop commands including coast
command stop the SLC.
28 Freeze output Freezes output frequency.
29 Start timer 0 Starts timer 0.
30 Start timer 1 Starts timer 1.
31 Start timer 2 Starts timer 2.
32 Set digital out A low Set Digital output A low.
33 Set digital out B low Set Digital output B low.
38 Set digital out A high Set Digital output A high.
39 Set digital out B high Set Digital output B high.
60 Reset Counter A Resets counter A to 0.
61 Reset Counter B Resets counter B to 0.
70 Start Timer 3 Starts timer 3.
71 Start Timer 4 Starts timer 4.
216 | Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters
To Next Page
Loading...
Need help?
General
