Bit number Bit description
Bit 3 Digital output terminal 15
P 9.3.3 T31 Analog Output [mA]
View the actual value at output 31 in mA. The value shown reflects the selection in P 9.5.1.1 T31 Mode and P 9.5.1.2 T31 Analog Output.
Default value: 0.00 Parameter type: Range (0.00–20.00)
Parameter
number:
1665 Unit: mA
Data type: uint16 Access type: Read
P 9.3.4 T33 Setting
View the setting of input terminal 33 (current or voltage).
Default value: 1 [Voltage mode] Parameter type: Selection
Parameter
number:
1661 Unit: –
Data type: enum Access type: Read
The following are the selections for the parameter.
Selection number Selection name
0 Current mode
1 Voltage mode
P 9.3.5 T33 Analog Input
View actual input on analog input 33.
Default value: 1.00 Parameter type: Range (0.00–20.00)
Parameter
number:
1662 Unit: –
Data type: uint16 Access type: Read
P 9.3.6 T34 Setting
View the setting of input terminal 34 (current or voltage).
Default value: 1 [Voltage mode] Parameter type: Selection
Parameter
number:
1663 Unit: –
Data type: enum Access type: Read
The following are the selections for the parameter.
218 | Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters
To Next Page
Loading...
