Group index Group name Parameter
index
Parameter name Parameter
number
Type
4.4.2.2 AC Brake, Max current 216 uint16
4.4.2.3 AC-Brake Voltage Control Kp 188 uint16
4.4.3 U/F Curve
4.4.3.1 Voltage Point 155 uint16
4.4.3.2 Frequency Point 156 uint16
4.4.4 Dependent Setting
4.4.4.1 Slip Comp. Gain 162 int16
4.4.4.2 Slip Comp. Time Constant 163 uint16
4.4.4.3 High Speed Load Comp. 161 int16
4.4.4.4 Low Speed Load Comp. 160 int16
4.4.4.5 Res. Damp Gain 164 uint16
4.4.4.6 Res. Damp High Pass Time Constant 165 uint16
4.4.4.7 Damping Gain 114 int16
4.4.4.8 High Speed Filter Time Const. 116 uint16
4.4.4.9 Low Speed Filter Time Const. 115 uint16
4.4.4.10 Voltage Filter Time Const. 117 uint16
4.4.4.11 Variable Torque Zero Speed Magne-
tization
150 uint16
4.4.4.12 Min Speed Normal Magnetizing
[Hz]
152 uint16
4.4.4.13 VT Level 1440 uint8
4.4.4.14 Min. Current at Low Speed 166 uint32
4.4.5 Dead Time Compensation
4.4.5.1 Dead Time Compensation Level 1407 uint8
4.4.5.2 Dead Time Bias Current Level 1409 uint8
4.4.5.3 Dead Time Compensation Zero Cur-
rent Level
1464 enum
4.4.5.4 Speed Derate Dead Time Compen-
sation
1465 uint16
4.6 Protection
4.6.1 Warning Freq. High 441 uint16
4.6.2 Warning Freq. Low 440 uint16
4.6.3 Warning Current High 451 uint32
4.6.4 Warning Current Low 450 uint32
278 | Danfoss A/S © 2024.03 AB413939445838en-000301 / 130R1254
Application Guide | iC2-Micro Frequency Converters
To Next Page
Loading...
