Pag 15 / 154
Manuale Lyra 600 sx elettr eng
Qualified technician
Technically qualified and skilled staff member assigned to transporting, moving and
installing the machine.
Machine operator
Qualified operator who has been properly trained to run the machine, able to operate on the
machine and is able to carry out the following operations:
- Verify the protective devices before starting up the machine;
- Effect controls, verifications and prepare the machine to execute the programmed
work cycles, only with the machine stopped in safe conditions;
- Start up and stop the machine through the use of the command elements on the
command panel with the protective devices closed and active and always remaining
outside the work zone;
- Run the machine to carry out work cycles with the protective devices closed and -
active and always remaining outside the work zone;
- Use the machine’s PLC, create, recall and/or edit and send work programs to be
executed;
- Restart the machine after a sudden stop or an emergency arrest;
- Load the product to be pace on the infeed conveyor (only on machines not equipped
with automatic loading systems);
- Do the machine cleaning operations with the electric and pneumatic power feed cut
off.
Mechanical maintenance technician
Qualified technician who is able to conduct the machine in normal conditions and with the
protective devices open and/or deactivated, and effect all the interventions of mechanical
nature for the adjustment, maintenance and repairs. He is not qualified to carry out
electrical interventions on energized parts.
Electrician
Qualified technician who is able to conduct the machine under normal conditions and with
the protective devices open and/or deactivated, and perform all the interventions of
electrical nature for adjustment, maintenance and repairs. He is qualified to perform
electrical intervention in the presence of voltage in the electric cabin.
Manufacturer’s technician
Qualified technician that the manufacturer places at the disposition of clients to carry out
complex repairs in particular situations, as agreed with the client
To Next Page