Delfin LYRA - Page 16

Pag 16 / 154
Manuale Lyra 600 sx elettr eng
2.2.1 Operators assigned to use the machine
ATTENTION
1 OPERATOR will be assigned to use the machine.
2.2.2 Training of operators
The user/employer will take charge of instructing and training the operators assigned to use
the machine in order to:
 Use the machine correctly.
 Know the type and the localization of residual risks.
 Be sensitive to problems regarding safety, and notify the employer on time with
regard to eventual malfunctions, dangerous situations.
 Know and respect the plates and signs prescribed.
 Execute scrupulously the controls, preparation and cleaning operations assigned,
according to the instructions in this manual
 Not intervene with actions that they are not authorized or qualified to do.
The training will be done by the manufacturer’s specialized staff and a report will be drafted
regarding the training performed.
2.2.3 Subjects of the operator training course
The minimum subjects the employer/user will have to train the operators on are
the following:
 General training.
 Safety norms (L. Decree 81/2008 and succeeding amendments).
 Workplace Hygiene.
Specific training:
 Technical characteristics of the machine.
 Machine preparations including replacement of film spools.
 Startup and arrest of the machine.
 Loading of product to be packed on the infeed conveyor.
 Intervening on and restoring the protective devices on the machine.
 Machine safety measures.
 Functioning modes of the machine.
 Restarting the machine after a sudden or emergency arrest.
 Machine cleaning operations.