Pag 44 / 154
Manuale Lyra 600 sx elettr eng
Measurement parameters
Measurements were done:
On an identical machine with the same equipment;
According to norm EN ISO 3746
In the assembly department of the manufacturer;
ATTENTION
The client is charged with the task of effecting the measurements of sound levels in the
installation site, and according to the levels measured, adopting the proper safety
provisions
The client is charged with the task of properly informing his own staff of the dangers
arising from sound emissions.
Only adequate protection may help avoid the danger of partial loss of hearing. The Client
is obliged to respect the national norms in force on these matters.
To Next Page
Loading...