Pag 51 / 154
Manuale Lyra 600 sx elettr eng
Fig. 4.1.1 Lifting device
To unload the machine use a reliable forklift with the adequate lifting force Fig. 4-1 Lifting
device.
NOTE
The machine is supplied with a hoist rod (see Fig. 4.1.2).
Fig. 4.1.2 Hoist rod
Put the forks of the lift truck between the bearing feet underneath the machine (Fig. 4.1.3)
taking care to open them as much as possible so as to offer the most steady support
possible.
NOTE Before any lifting of the machine, you must disconnect the infeed
conveyor from the machine. The infeed conveyor must be lifted separately from
the machine.
To Next Page
Loading...