Delta AX Series User Manual

AX-Series Motion Controller Instructions Manual Chapter 2
2-264
 When DMC_GroupPower bRegulatorOn is True, the single-axis status switches from Disabled to Standstill.
 When bExecute of DMC_GroupEnable is True, the axis group status switches from GroupDisabled to GroupStandby.
 When Axis_1 and Axis_2 are true, the parameters will be written to Velocity, Acceleration, Deceleration, and Jerk of
each single axis.
 When DMC_MoveDirectAbsolute is True, each single axis will perform absolute positioning according to the set speed
of the single-axis parameter.
 When the positioning of each single axis is completed, bBusy is False and bDone is True.

Delta AX Series Specifications

General

Brand	Delta
Model	AX Series
Category	Controller
Language	English