Delta AX Series

AX-Series Motion Controller Instructions Manual Chapter 2
305
2.3.2.8 DMC_CamReadTappetStatus
 Supported Devices: AX-308E, AX-364E
DMC_CamReadTappetStatus reads the status of multiple tappets.
FB/FC Instruction Graphic Expression
FB DMC_CamReadTappetStatus
ST Language
DMC_CamReadTappetStatus_instance(
Tappets : =,
bEnable : =,
iTrackID1 : =,
iTrackID2 : =,
iTrackID3 : =,
iTrackID4 : =,
iTrackID5 : =,
iTrackID6 : =,
iTrackID7 : =,
iTrackID8 : =,
bValid =>,
bBusy =>,
bError =>,
ErrorID =>,
bStatus1 =>,
bStatus2 =>,
bStatus3 =>,
bStatus4 =>,
bStatus5 =>,
bStatus6 =>,
bStatus7 =>,
bStatus8 =>) ;
 Inputs
Name Function Data Type
Setting Value
(Default Value)
Timing to Take Effect
bEnable
The instruction is enabled when
bEnable changes from False to
True.
BOOL
True/False
(True)
-