Delta AX Series

AX-Series Motion Controller Instructions Manual Preface
1
Preface
P.1 Introduction
Thank you for purchasing the AX series Motion Controller with our advanced motion control system. Delta’s AX series motion
controller based on CODESYS integrates the control function of PLCs and motion controllers into one platform.
This manual introduces PLCOpen standard motion control instructions and Delta-defined instructions including single-axis,
multi-axes instructions, and motion control applications.
Ensure that you fully understand the configuration and operations of the AX series motion control system and use the AX series
Motion Controller CPU correctly.
P.1.1 Applicable Products
This manual relates to the following products
- AX-3 series/AX-8 series
P.1.2 Associated Manuals
The related manuals of the AX Motion Controller series are composed of the following.
1. DIADesigner-AX User Manual
Contents include the use of DIADesigner-AX, the programming languages (ladder diagrams, sequential function charts,
function block diagrams, and structured texts), the concept of POUs and Task, and the operation of motion control
programming.
2. AX-3 Series Operational Manual
It introduces basic knowledge of motion control structure, software/hardware setup, quick start of Software operations,
devices to be used, motion control operations, troubleshooting, Input/ Output modules, modules of temperature
measurement, etc.
3. AX-8 Series Operational Manual
It introduces basic knowledge of motion control structure, software/hardware setup, quick start of Software operations,
devices to be used, motion control operations, troubleshooting, Input/ Output modules, modules of temperature
measurement, etc.