VENUE Profile Guide148
4 Click the Device Selector pop-up menu and do one of the fol-
lowing:
• Choose Previous Installs to access any plug-in installers af-
ter a system update.
• Choose Console to access all factory-installed plug-in in-
stallers. after a system update or a full system restore.
• Choose an external storage device, as available, to access
plug-in installers loaded in the CD-ROM drive.
5 Select a plug-in from the Plug-Ins to Install list on the left by
doing any of the following:
• Click to select a single installer.
• Shift-click to select multiple contiguous installers.
• Control-click to select or deselect installers one at a time.
6 Click Install to install the selected plug-ins. Once installed,
the plug-in appears in the Installed Plug-Ins list on the right.
7 Repeat as necessary to re-install all plug-ins needed on the
system.
Installing Plug-Ins Manually
If a plug-in does not appear in the Plug-Ins to Install list, it
may not have a fully compatible VENUE installer and must be
manually installed. This is required the first time you install
the plug-in, and whenever you need to re-install a plug-in
(such as after using the System Restore CD to update or reset
the system).
To install a plug-in manually:
1 Make sure all sound systems are shut down or muted.
2 Insert the plug-in installer disc into the CD-ROM drive.
3 Go to the Options page and click the System tab.
4 Hold the Ctrl key and click Shutdown Console on-screen. Fol-
low on-screen directions to exit to the Desktop.
5 Copy the plug-in installer to the partition named User Data.
6 Launch the plug-in installer application and follow any
on-screen directions. If prompted, do not restart the system
from a plug-in installer. (Doing so will not harm the system,
but will take longer, especially if you have multiple plug-ins to
install manually.)
7 Quit the installer application and eject the installer disc.
8 Click the Return to D-Show shortcut on the desktop to
re-launch the VENUE D-Show software.
9 Go to the Options page and click the Plug-Ins tab. Verify that
the manually installed plug-in appears in the Console list of
available plug-ins.
Figure 14. Options > Plug-Ins screen
Device selector
Available plug-ins Installed plug-ins
Install
Choosing a Device
A plug-in without a VENUE installer may still be com-
patible. Consult the plug-in manufacturer for compatibil-
ity information.
To Next Page
Loading...
Need help?
General
