VENUE Profile Guide36
Monitoring
The Monitoring section provides level encoders for the Moni-
tor (near field monitors) and Headphone outputs.
Monitor bus delay can be set on-screen in the Options > Bus-
ses page.
USB Port and System Status LEDs
These LEDs indicate power and system status. These controls
are located in the upper left corner of the control surface.
Meters
The Meter section includes the following:
Bus Output Meters
Eight Bus Output meters provide selectable metering of Out-
put busses.
Mains
The Mains meters provide constant level indication of the
house (Mains) output.
Monitoring controls
Top panel USB port and status LEDs
For more information, see Chapter 28, “Troubleshooting.”
Meters
For more information, see Chapter 13, “Metering.”
To Next Page
Loading...
