VENUE Profile Guide162
Plug-In Latency and Processing Delay
Plug-In latency includes processing delay of the plug-in itself
plus routing delay, as follows:
• Instance delay: 2 samples per plug-in
• DSP routing delay: 3 samples
Viewing Plug-In Latency
Cumulative channel processing delay can be viewed by
right-clicking the Inserts area of the selected channel. The cu-
mulative delay includes latency reported by all inserted
plug-ins, signal routing and the known hardware insert delay,
if applicable.
Individual plug-In processing delay can be seen by right-click-
ing the plug-in icon in the rack. Use the number reported
when calculating latency for manual delay compensation.
Examples
If there is only one plug-in on a channel, the total delay will
be the amount of plug-in latency + 2 + 3. (2 samples for the
one plug-in instance, plus 3 samples for the DSP routing to the
racks and back.)
If you have two plug-ins on a channel or bus, the delay will be
plug-in #1 latency + 2 + plug-in #2 latency + 2 + 3. If plug-in #1
has 12 samples of latency, and plug-in #2 has 15, total latency
will be 34 samples (12 + 2 + 15 + 2 + 3).
Viewing cumulative delay by right-clicking the Inserts section
To Next Page
