EasyManua.ls Logo

DigiDesign VENUE Profile - Chapter 29. Control Surface Reference; VENUE Profile Console

DigiDesign VENUE Profile
272 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 29: Control Surface Reference 239
Chapter 29: Control Surface Reference
This chapter describes the ports and connectors on the VENUE Profile console.
VENUE Profile Console
Top Panel USB Port
A USB 1.1 port is provided on the top panel, in the upper left
corner of the console. Use this USB port for iLok Smart Keys or
any other USB device such as a key disks.
Front USB Ports
Two USB 1.1 ports are provided on the front of console. Use
these ports to connect a USB keyboard and a Trackball (or
mouse). These ports also support iLoks and USB key disks.
Headphone Connector
The headphone connector on the front of the console is a
standard 1/4-inch stereo (TRS) headphone jack. The connec-
tor is fed by the Monitor bus.
Figure 20. VENUE Profile connectors
USB (2) and Headphones
Talkback
USB port
Back Panel Connectors
For faster data transfer to and from USB storage devices, use
the USB 2.0 ports on the Mix Rack and FOH Rack.

Table of Contents

Related product manuals