VENUE Profile Guide152
Plug-In Racks
The Plug-Ins page provides four plug-in racks. Each of the four racks has 25 slots into which you can load a plug-in. The four
different racks can be viewed all at once, individually, and in varying zoom levels.
Naming Plug-In Racks
By default, the racks are named Rack 1, Rack 2, Rack 3, and
Rack 4. You can rename each rack as needed.
To rename a plug-in rack:
1 Double-click the rack name to highlight it on-screen.
2 Type a new name and press Enter. To return a rack to its de-
fault name, leave the name blank and press Enter.
Rack Views
The Plug-Ins page can be displayed in Full or Zoom views,
with the option to display either view in Mini-view mode.
Full View
The default view of the rack screen is Full view, in which all
four racks are shown (see Figure 15). This screen provides ac-
cess to all rack slot controls, and shows an icon representing
each assigned plug-in. This lets you quickly see what plug-ins
are available, and adjust their routing.
Figure 15. Plug-In racks and rack slots, Main view, with custom rack names shown.
Click to display
Racks 1–4
Rack slots
Mode and Status
Presets
Zoom Toggle
Push-pin
Plug-Ins can be placed in any rack slot. Use the different
racks to organize processing functions such as Dynamics,
EQ, Reverb, or Group Inserts.
To Next Page
Loading...
Need help?
General
