Chapter 22: Events 209
Trigger Types
The following table lists the available trigger types and properties, along with a description of each.
Table 23. Trigger List, with default settings
Trigger Type Property 1 Property 2 Description
Fader Above Channel name/number Fader level –inf to +12 dB
(Default: –60 dB)
Fader moved above threshold level
Fader Below Channel name/number Fader level –inf to +12 dB
(Default: –inf)
Fader moved below threshold level
Mute Channel name/number On (default)
Off
Mute active/inactive
Solo/AFL Any input, output, VCA,
Solo In Place
On (default)
Off
Solo/AFL active/inactive
Function Switch Function Switch 1–8 Press (default)
Release
On button press (down)
On button release (up)
Footswitch Footswitch 1, 2 Open
Closed (default)
Footswitch input high
Footswitch input low
GPI Input GPI input 1–2 Open
Closed (default)
GPI Input high
GPI Input low
Recall Snapshot Snapshot number and name Event triggered by snapshot
Preview Mode On (default)
Off
Preview Mode active/inactive
Propagate Mode On (default)
Off
Propagate Mode active/inactive
Edit Mode On (default)
Off
Edit Mode active/inactive
Talkback On (default)
Off
Talkback active/inactive
Flip to Faders On (default)
Off
Flip to Faders active/inactive
Show Mode Console Show Mode is active
Config Mode Console Config Mode is active
System Start System software initialized
Plug-In Rack Ready Mirrors plug-ins rack Ready state
To Next Page
Loading...
