VENUE Profile Guide176
Next Snapshot Indication in Status Display
The Snapshot Status display shows the currently targeted
(next) snapshot in red text directly above the display of the
last (most recently recalled) snapshot. Pressing the Snapshot
Recall button immediately recalls the targeted snapshot and
makes it the last recalled snapshot.
Snapshot Controls on the Console
Snapshot controls are provided in the Snapshots section.
These controls provide direct access to a few basic snapshot
commands and allow manual control of snapshot recall.
Snapshots Section
You can target (select), store, and recall snapshots from the
Snapshots controls in this section.
The Snapshot controls in the Snapshots section perform the
following functions:
Store Stores the current state of all console parameters in the
targeted snapshot. This switch mirrors the Store button in the
Snapshots page.
Recall Recalls the targeted snapshot. This switch mirrors the
Recall button in the Snapshots page.
Select Display and Encoder Turning the Select encoder scrolls
through and selects the targeted snapshot in the Snapshots
list. The 6-character display shows the name of the currently
targeted snapshot. A period is appended to the displayed snap-
shot name to indicate whenever it has been edited since being
recalled.
Previous Instantly recalls the snapshot prior to the most re-
cently recalled snapshot. This switch mirrors the Recall Previ-
ous button in the Snapshots page.
Next Instantly recalls the snapshot immediately following the
most recently recalled snapshot. This switch mirrors the Recall
Next button in the Snapshots page.
F1 for Preview Mode
When the Mute Groups/Function section is in Function
mode, pressing F1 engages Preview mode (see “Preview Mode”
on page 187).
Snapshots List
Snapshot Entries
Each entry in the Snapshots List has a number (001–999) and
name, along with icons for Lock and Enable status. If either
the MIDI Read or Generate feature is enabled, each snapshot
will also have a time code value, trigger indicator, or send in-
dicator. Tempo can also be shown, instead of MIDI (both
MIDI and Tempo are available parameters at all times; the
only limitation is that the Snapshots List can only display one
or the other at a time).
Recall Buttons
The Recall Previous (–) and Recall Next (+) buttons at the top
of the Snapshots List cause the previous or next snapshot to be
targeted and recalled in one step.
Chase MTC
Enables or suspends automated recall of snapshots when ei-
ther the MTC Read or MTC Generate option is enabled.
Next and Last Recalled snapshot display in the Status area
Snapshots section on the console
Next snapshot (red)
Most recently recalled
snapshot (green)
Store
Preview
Recall
Previous
Select
Display and Encoder
Next
The Previous and Next switches combine target and recall
actions in one step, causing the next or previous snapshot to
be instantly active. These switches cannot be used to pre-
view snapshots before recalling them.
For more information on how to use the Event List to cus-
tomize this or other console functions, see Chapter 22,
“Events.”
Snapshots list
To Next Page
