Chapter 21: Snapshots 191
3 Click Add and choose a message from the pop-up menu.
A MIDI plug icon appears in the Snapshots List for each snap-
shot that contains MIDI messages.
To record incoming MIDI data to a snapshot.
1 Click REC.
2 Send a supported MIDI command.
3 Click REC again when done.
To edit a MIDI message in the MIDI list:
1 Double-click the message text to display the pop-up menu
bar for the message.
2 Choose the message name and send channel or device ID
from the pop-up menus.
3 Enter the message values in the text fields or drag up or
down across the text field to change the values.
4 Click in the MIDI list area to dismiss the pop-up menu bar.
To remove a MIDI message from a snapshot:
Right-click the MIDI message in the MIDI list and choose
Delete.
Viewing MIDI Messages in Hexadecimal
Format
You can toggle the view of MIDI messages in the MIDI list be-
tween hexadecimal and decimal formats.
To toggle the view format of the MIDI list:
Click the Hex button in the MIDI/Plug-Ins list header.
Safing MIDI Message Output
You can temporarily disable output of embedded MIDI mes-
sages so that they are not sent when a snapshot is recalled,
even when the MIDI data type is scoped.
To safe MIDI message output on-screen:
1 Go to the Snapshots page and click the Recall Safe tab.
2 Click the MIDI global output Safe button above the param-
eter matrix so that it is lit.
Adding Tempo Data to Snapshots
The Snapshots List can be toggled to display Tempo, along
with a Tempo On/Off indicator for each snapshot entry.
Storing a tempo with snapshots lets your system tempo
change per song or scene. This lets you take full advantage of
Tempo Sync (aka Tap Tempo) to synchronize delay and echo
plug-ins.
Displaying Tempo in the Snapshots List
To show Tempo in the Snapshots List:
Right-click anywhere in the Snapshots List and choose Show
Tempo.
Tempo is displayed in BPM (beats per minute) or milliseconds,
as set in the Options > Misc page.
To change the units for Tempo display:
1 Go to the Options > Misc page.
2 In the Tap Tempo section, click to select BPM or ms.
To sort items by tempo:
With Tempo shown in the Snapshots List, right-click and
choose Sort by Tempo.
Assigning and Enabling a Tempo
Each snapshot can store a custom tempo value. You can man-
ually enter a custom tempo, or use a shortcut to assign the cur-
rent System Tempo.
You can use the Tempo Enable icon to enable or disable tempo
recall when the associated snapshot is recalled.
Adding a message to the Snapshot MIDI list
Editing a MIDI message in the snapshot MIDI list
MIDI output is automatically suspended while in Preview
mode.
Snapshots List showing tempo
To Next Page
Loading...
Need help?
General
