Installation
SmartDate X40 BFSE Version 1.0 Feb 2011
123/286
• Save the file as ‘binary_jobIO.flexio’ and download it to the Controller, using CoLOS
Control or CoLOS Tools.
Note: The file must be save in
Unicode format
• Select Menu->Engineering->Select FlexIO Map->binary_jobio.flexIO.
• Re-power the Controller
• Download and select the jobs using the Controller User Interface
• Select Menu>Select Job and choose the job to print on line A and enter the
required job data
• Select Menu>Add Job to Sequence and choose the job to print on line B and
enter the required job data
• Start printing - the Controller will change between jobs when the digital input 1 is
switched high/low
To Next Page
Loading...
