Installation
SmartDate X40 BFSE Version 1.0 Feb 2011
62/286
■ Bracket Assembly
Standard Modular Brackets
The following explains how to assemble and install the:
• SmartDate X40 modular bracket assembly
• Registration assembly
Tools Required:
The following tools and materials are required:
• Tape measure (mm scale)
• Hex key wrenches 2mm, 2.5mm, 3mm, 4mm, 5mm
• Soft faced mallet
• Engineer’s square
• 8mm AF wrench
• 17mm AF wrench
• Loctite 638 (high strength retainer)
• Loctite 242 (thread locker)
To Next Page
Loading...
