Installation
SmartDate X40 BFSE Version 1.0 Feb 2011
94/286
Rear Panel Connectors and Pin Outs
1. USB – Type B Connector*
2. Ethernet Connector
3. USB – Type A Connector
4. RS-232 Comms Connector
5. External I/O Connector
6. Printer Power / Control Connector
7. Mains Connector, fuse and Power Switch
1 - *USB – Type B Connector
This connection is for direct connectivity. (e.g. CoLOS)
2 - Ethernet Interface
For network connection
3 - USB – Type A Connector*
This connection is provided for use with a USB memory device to download or
upload data from or to the SmartDate X40 Controller.
4 - RS-232 Comms Connector
A 9-way D type connector, allowing external data input by RS-232.
To Next Page
Loading...
