Dräger Julian - Page 34

The workstation switches to standby mode after
completing the minimal test.
Display (example):
If no key is pressed in standby mode for two minutes,
the standby screen is switched off and a screen saver
with the Dräger logo is displayed instead.
To switch the standby screen on again:
● Press the rotary knob or any other key.
To start Julian:
Version with rotary knob for O2 emergency metering:
● Turn rotary knob for O2 emergency metering to 0.
● Select fresh gas setting and ventilation mode.
See »Operation«, page 36 onwards.
34
Starting Up
Emergency start
delete
trend
leakage
test
config.
Julian
SW version 2.0
01. Nov. 98
Standby
2.00
L/min
100
Operation with , or
MAN
SPONT
IPPV
PCV
Freshgas O
2
O
2
%
First interruption of self-test
"Only for internal use by Draeger. Not applicable as Instructions for Use!"