Vigor2760 Series User’s Guide
90
without editing the NAT profile(s).
It is convenient for processing multiple NAT profiles at one
time.
Delete
Remove the selected NAT profile.
Move
Move the selected profile to a new place.
Reset
Click it to rest to factory default settings.
Refresh
Click it to refresh the web page.
Enable
Display the activation status for such interface.
Enable – The NAT profile is activated.
Disable –The NAT profile is not activated.
Name
Display the profile name for NAT.
External Interface
Display the WAN interface (for external connection) applied
by such virtual host profile.
Mapped IP Address
Display the LAN IP address that the Destination IP will be
transferred to.
Mapped IP Address End
This value will be assigned by the system automatically
when Port Redirection is selected as the Type.
Type
Display the NAT type used in such profile.
To add a NAT profile, please do the following:
1. Under Virtual Host, click Add.
2. The following page appears.
Available parameters are listed below:
To Next Page
Loading...
Need help?
General
