Draytek Vigor2760 - Page 111

Vigor2760 Series User’s Guide
101
Dest Port Start /
Dest Port End
Displays the port number setting for the start/end of the
destination port.
To add a policy route profile, please do the following:
1. Click Add.
2. The following page appears.
Available parameters are listed below:
Item Description
Enable
Check the box to enable such profile.
Name
Type a name for such profile.
Criteria
Protocol - Use the drop-down menu to choose a proper
protocol for the WAN interface.
Source IP Address – Specify an IP address or a range of IP
addresses as the source IPs for WAN interface.
 Any – Any IP can be treated as the source IP.
 Single – Type one IP address.
 Range – Type the start and end IP addresses on