Vigor2760 Series User’s Guide
125
WDS
Name –Display the name of the WDS profile. Such name is
assigned by the router in default.
Enable –Display the activation status for such interface.
Enable – The profile is activated.
Disable –The profile is not activated.
Peer MAC Address - Display the MAC address of the peer.
Apply
Click it to save the settings.
Reset
Click it to retrieve the default settings of this page.
Refresh
Click it to clear current settings and return to the settings
saved previously.
To edit a WDS profile, please do the following:
1. Move your mouse cursor on the WDS profile (from WDS1 to WDS4) you want to edit
and click on it. In this case, we choose WDS2.
2. The following page will appear immediately.
Available parameters are listed below:
Item Description
Name
Display the name of the WDS profile. Such name is assigned
by the router in default.
Enable
Check the box to enable the WDS profile.
Peer MAC Address
If you choose Bridge as the connecting mode, please type in
the peer MAC address in these fields.
Security Setting
There are several types for security, OPEN, WEP and
To Next Page
Loading...
Need help?
General
