Vigor2760 Series User’s Guide
149
2. The following setting page will appear.
Available parameters are listed below:
Item Description
Name
Type a name for this profile. Maximum 20 characters are
allowed.
Description
Give a brief description for such profile.
Type
Determine the address type for the IP address.
Single – The object contains only one IP address.
Range –The object contains several IPs within a range. If
you choose this type, you have to specify Start IP Address
and End IP Address.
Subnet –The object contains one subnet for IP address. If
you choose this type, you have to specify Start IP Address
and the Subnet Mask.
MAC–The object contains MAC address. If you choose this
type, you have to specify a MAC Address.
To Next Page
Loading...
Need help?
General
